EasySYNC CDM USB Serial Converter Driver 2.08.08
This package provides certified driver files used for USB Instruments, oscilloscopes and logic analyzers.
Available for:
- DS1M12
- USB2-F-7x01
- PS40M10
Driver Installation:
Driver installation can be completed in one of two ways:
1. The latest device drivers are available through the Microsoft Windows
Update service. When the Found New Hardware Wizard appears, allow it to find the drivers from the Windows Update service. For Windows 7, the user will need to open Device Manager, right-click on the device and select update drivers.
2. Download the latest device drivers available. Extract the files to a convenient location on your local drive. Connect the supplied USB cable to the device and the other end of the cable to a spare USB port on the PC.
The Windows “Found New Hardware Wizard” will appear. Select the choice to install the drivers from a specific location and then browse to the folder created in the previous step where you unzipped the files.
About Device Driver:
If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.
Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.
When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.
However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.
That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.
It is highly recommended to always use the most recent driver version available
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games
Try to set a system restore point before installing a device driver
This will help if you installed a wrong driver
Problems can arise when your hardware device is too old or not supported any longer
Most popular Easysync 64-bit drivers
Members area
Top 64-bit Drivers
-
Apple Windows 10 Boot
Camp 6 Driver Bundle x64 driver -
FTDI USB Serial
Converter Driver 2.12.28
64-bit x64 driver -
Asus Support Device
Driver 10.0.0.10 for
Windows 10 64-bit x64 driver -
Intel Precise Touch
Device Driver 1.2.0.70
for Windows 10 64-bit x64 driver -
Yokogawa AQ7260 USB
Driver 1.0.3.9 x64 driver -
Icom OPC-1122U USB
Driver 1.5 x64 driver -
Magic Control T6 USB
Station Driver
1.0.1701.322 for Windows
10 Creators Update x64 driver -
Corsair H110i GTX Cooler
Driver/Utility 5.11.95 x64 driver -
HP GNSS Sensor Driver
1.0.2.1 for Windows 10 x64 driver -
Keyspan USB Serial
Adapter Preloader Driver
3.7.0.5 64-bit x64 driver -
ASUS System Firmware
10.1.2.308 for Windows
10 64-bit x64 driver -
Corsair H110iGT Cooler
Driver/Utility 5.11.95 x64 driver -
ASUSTeK Intel SCSI
Adapter Driver
20.0.0.1037 for Windows
10 Vibranium 64-bit x64 driver -
Asus Support Device
Driver 10.0.0.13 for
Windows 10 Anniversary
Update 64-bit x64 driver -
ASUS System Firmware
10.1.2.602 for Windows
10 64-bit x64 driver