Processor && Chipset:

- Processor Manufacturer: Intel
- Processor Type: Core i7
- Processor Model: i7-4500U
- Processor Core: Dual-core (2 Core)

Memory:

- Standard Memory: 8 GB
- Maximum Memory: 12 GB
- Memory Technology: DDR3L SDRAM
- Number of Total Memory Slots: 1
- Memory Card Reader: Yes
- Memory Card Supported: Secure Digital (SD) Card

Storage:

- Hard Drive Capacity: 500 GB
- Hard Drive Interface: Serial ATA

Display && Graphics:

- Screen Size: 15.6
- Screen Mode: HD
- Screen Resolution: 1366 x 768
- Backlight Technology: LED
- Touchscreen: Yes
- Multi-touch Screen: Yes
- Graphics Controller Manufacturer: NVIDIA
- Graphics Controller Model: GeForce GT 720M
- Graphics Memory Capacity: 2 GB
- Graphics Memory Accessibility: Dedicated

Network && Communication:

- Wi-Fi Standard: IEEE 802.11a/b/g/n
- Ethernet Technology: Gigabit Ethernet

Built-in Devices:

- Webcam: Yes
- Microphone: Yes

Interfaces/Ports:

- HDMI: Yes
- Total Number of USB Ports: 3
- Number of USB 2.0 Ports: 2
- Number of USB 3.0 Ports: 1
- VGA: Yes
- Network (RJ-45): Yes

Input Devices:

- Keyboard: Yes
- Pointing Device Type: TouchPad

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to chanAbout SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don&’t forget to constantly check with our website so that you don&’t miss a single new release.
ge from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don&’t forget to constantly check with our website so that you don&’t miss a single new release.