You are here: Home \ Drivers \ Hdd / Ssd / Nas / Usb Flash \ Buffalo \ Buffalo TS3420RN NAS Firmware 5.16

Buffalo TS3420RN NAS Firmware 5.16

OS: Windows 2008, Windows 7, Windows 7 64 bit, Windows Server 2012, Windows 8.1, Windows 8.1 64 bit, Windows 10, Windows 10 64 bit, Windows Server 2016, W

downloads: 10

size: 515.70 MB

updated: June 16, 2022

manufacturer: Buffalo

tags: Buffalo TS3420RN NAS Firmware 5.16, download Buffalo TS3420RN NAS Firmware 5.16, Buffalo TS3420RN NAS Firmware 5.16 free download, Buffalo TS3420RN Network Storage Firmware, Buffalo TeraStation 3420RN NAS Firmware, Buffalo TeraStation 3420RN Storage Firmware, TS3420RN, Firmware, Buffalo, NAS

Download

&Added and Modified Features:&&- [Microsoft OneDrive Sync] Modified to be able to configure whether old files with the same name will be deleted before uploading.&
- [Microsoft Azure Storage Sync] Modified the status while detecting target files to display as “Acquiring target files”.&
&&Bug Fixes:&&- [Amazon S3] Fixed a bug where a backup job failed when backing up large files on the Amazon S3 remote folder.&
- [Microsoft OneDrive Sync] Fixed a bug where the I64 message repeatedly appeared and disappeared.&
- [Microsoft OneDrive Sync] Fixed a bug where token error re-occurred after restarting the TeraStation even if after the token update process finishes.&
- [iSCSI] Fixed a bug where data became corrupted if it was stored on a file I/O volume that was created on an XFS-formatted drive.&
- [Drives] Fixed a bug where drive temperature became too high on the TS51210RH TeraStation model.&
- [Drives] Fixed a bug where the drive capacity did not increase after a drive added to the encrypted RAID array using RMM.&
- [Migration] Fixed a bug where a subfolder was selectable as a migration destination folder.&
- [Remote Management Service] Fixed a bug where the TeraStation did not recover from an abnormal disconnection.&
- [Remote Management Service] Improved the acquisition speed of information sent to the service.&
- [Power Management] Fixed a bug where the E10 error occurred with an Omron UPS device.&
&&Caution:&& - Please consult your local technical support representative if you experience any problems caused by this firmware update.&
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.&
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.&
&&How to Use the Updater:&& 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.&
&For example, if the IP address and subnet mask of the computer are&&
& " 192.168.0.10 , 255.255.255.0 "&&
&and the IP address and subnet mask of the TeraStation are&&
& " 192.168.1.150 , 255.255.255.0 "&&
& then the updater will _not_ work properly.&&
&In this case, reconfigure the TeraStation's IP address and subnet mask to&&
& " 192.168.0.150 , 255.255.255.0 ".&&
&Then they will be on the same subnet and the updater will work properly.&&
2. Close all applications. Also, stop or exit any firewall software. &
3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.&
4. Select the TeraStation to update if multiple TeraStation are connected.&
5. Click "Update" and enter the TeraStation's admin password.&
6. Click "OK".&
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.&
8. When the update finishes, a message will be displayed.&&About Network-Attached Storage Updates:&&Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.&
&
Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.&
&
So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.&
&
Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.&
&
With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.&&&

Buffalo TS3420RN NAS Firmware 5.16 64-bit driver download - X 64-bit Download

Popular x64-bit Drivers Tags

Buffalo TS3420RN NAS Firmware 5.16

Most popular Buffalo 64-bit drivers

Members area

Top 64-bit Drivers

64-bit Tags

	x64 / 64-bit Drivers Search:

Login:
Password:
Remember me