Download

Intel Rapid Storage Technology (Intel RST) CLI Pro is a command line utility for Windows 10 that can be used to perform basic operations on Intel Optane memory capable systems such as the following: Enable acceleration, Disable acceleration, View progress of Enable/Disable action.

Resolved Issues:

- rstclipro returns error with "-I -v" parameter if the system doesn't have Intel Optane Memory or RAID volume
- BSOD(7E) occurred intermittently when enabling Intel Optane Memory H10 volume via CLI w/
- BSOD seen with idle during Modern standby when HDD idle timer is set to less than 30 sec and D3 is supported
- BSOD(0x50) seen when remove and re-connect the original disk (that is a member of a RAID volume) and power on system.
- [Brazil]Sentence translation incorrect during driver installation process.
- Intel RST Middleware reported Intel Optane Memory volume disable error 0xA0070027
- BSOD during S3StatePwrTest & S4StatePwrTest on RAID matrix
- No warning pops up in the system tray when unplug the device from RAID volume with the system off (Notifications settings is Enabled).
- Black screen then five minutes later BSOD occurred during system restart if remove one HDD/SSD on SATA RAID1 config.
- Device drivers does not show platform name windows.20h1_vibr anium.x64
- System hangs while running DVD stress test intermittently with Intel Optane MemoryH10 volume
- FC BSOD issue seen intermittently by the driver [HSA] Unable to enable Intel Optane Memory with prior HSA Version to 18.1 if Legacy (RST or Optane Memory) application is previously installed and removed. Toast pops up
- Intel Optane Memory SSD show offline in Intel Optane Memory and Storage Management GUI.
- Pop you must restart your computer after click 'Link Power Management' disable button via HSA with NVMe drives
- BSOD 0XD1 when run Modern standby stress test with SSD/RAID
- No warning pops up in the system tray when unplug the device from RAID volume with the system up and running (Notifications settings is Enabled).
- Intermittent BSOD D1 seen with Intel Optane Memory volume during I/O stress test
- Smart data not available on SATA raid0
- "Error Code: 0x20000001" happens if click [Reboot] button for twice or more times.
- Pinning files size are not the same in Intel Optane Memory and Storage Management and file explorer
- Wrong notification order during Intel Optane Memory volume rebuild
- Files disappear after pin the DUP driver to the Intel Optane Memory in IRST UI.

Known Issues:

- [WHQL][20H1] C4 BSOD from " module during HLK tests for Intel NVMe Controller (Ronin)
- "Intel Optane Memory and Storage Management" doesn't full screen after rotating
- click HSA " Change type" item under Recovery mode system, results in HSA UI crash
- BSOD(code:09f) occurred during resuming from MS intermittently with Intel Optane Memory volume
- F6 driver cause system crash when you hot-plug SATA device

This download is valid for the products listed below:

- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 16GB + Intel QLC 3D NAND SSD 256GB, M.2 80mm PCIe 3.0)
- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 32GB + Intel QLC 3D NAND SSD 1TB, M.2 80mm PCIe 3.0)
- Intel Optane Memory H10 with Solid State Storage (Intel Optane Memory 32GB + Intel QLC 3D NAND SSD 512GB, M.2 80mm PCIe 3.0)
- Intel Optane Memory M10 Series (16GB, M.2 42mm PCIe 3.0, 20nm, 3D XPoint)
- Intel Optane Memory M10 Series (16GB, M.2 80mm PCIe 3.0, 20nm, 3D XPoint)
- Intel Optane Memory M10 Series (32GB, M.2 80mm PCIe 3.0, 20nm, 3D XPoint)
- Intel Optane Memory M10 Series (64GB, M.2 80mm PCIe 3.0, 20nm, 3D XPoint)
- Intel Optane Memory Series (16GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)
- Intel Optane Memory Series (32GB, M.2 80mm PCIe 3.0, 20nm, 3D Xpoint)
- Intel Rapid Storage Technology (Intel RST)

About RST (Rapid Storage Technology) Drivers:

Once Intel's Rapid Storage Technology (RST) driver is applied, desktop and notebook systems will be able to manage the available storage (one or more drives) more easily.

And that's not all you should expect: updating the RST version can also bring about improved storage performance, lower power consumption, faster boot times, quicker data reads, as well as several other changes.

As far as applying this release is concerned, simply make sure your system configuration is compatible with this package, run the available setup, and follow the on-screen instructions for a complete installation. In addition to that, don't forget to perform a reboot to make sure that all changes take effect properly.

Even though other operating systems might be compatible as well, we do not recommend installing this package on platforms other than the specified ones.

With this in mind, click the download button, and get and apply the present version. Also, check with our website as often as possible in order to stay up to date with latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.