New for this release:

- Support for Windows 11

Note:

- This version of the NVMe drivers is intended for Client/Consumer drives.

This download is valid for the products listed below:

- Intel Optane SSD 905P Series (1.5TB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (480GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 905P Series (1.5TB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (960GB, 2.5in PCIe x4, 3D XPoint)
- Intel Optane SSD 900P Series (280GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel Optane SSD 905P Series (380GB, M.2 110mm PCIe x4, 20nm, 3D XPoint)
- Intel SSD 750 Series (800GB, 1 2 Height PCIe 3.0 x4, 20nm, MLC)
- Intel SSD Pro 7600p Series (256GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (512GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD Pro 7600p Series (2.048TB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 660p Series (2.0TB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 660p Series (1.0TB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 750 Series (800GB, 2.5in PCIe 3.0 x4, 20nm, MLC)
- Intel SSD 760p Series (128GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 750 Series (400GB, 1 2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD Pro 7600p Series (1.024TB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 760p Series (1.024TB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 760p Series (256GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 660p Series (512GB, M.2 80mm PCIe 3.0 x4, 3D2, QLC)
- Intel SSD 750 Series (400GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD Pro 7600p Series (128GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel Optane SSD 900P Series (280GB, 2.5in PCIe x4, 20nm, 3D XPoint)
- Intel SSD 750 Series (1.2TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel Optane SSD 900P Series (480GB, 1 2 Height PCIe x4, 20nm, 3D XPoint)
- Intel SSD 760p Series (2.048TB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 760p Series (512GB, M.2 80mm, PCIe 3.1 x4, 3D2, TLC)
- Intel SSD 750 Series (1.2TB, 1 2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD 665p Series (2.0TB, M.2 80mm PCIe 3.0 x4, 3D3, QLC)
- Intel SSD 665p Series (1.0TB, M.2 80mm PCIe 3.0 x4, 3D3, QLC)
- Intel SSD E 6100p Series (256GB, M.2 80mm PCIe 3.0 x4, 3D2, TLC)
- Intel SSD E 6100p Series (128GB, M.2 80mm PCIe 3.0 x4, 3D2, TLC)

About Storage Driver/Utility:

If you apply this software, the system will be able to make use of several features concerning available storage controllers. However, make sure to confirm that your computer configuration is supported by this release before any utility is installed on it.

When updated to a new version, this software can improve data reading speeds, enhance storage performance, shorten waiting times for copying files or turning on the system, and bring about various other changes.

Should you wish to install this release, all you have to do is simply get the downloadable package, run the available setup, and follow all displayed instructions to complete the process. Bear in mind that even though other platforms might be suitable, it would be best if you apply this release only on specified OSes.

In addition to that, after the installation has finished, we recommend that you do a system reboot to ensure that all changes take effect properly (which is always a good idea after every important update).

That being said, click the download button now and install the package. Don't forget to check with our website as often as possible so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.