ePrivacy and GPDR Cookie Consent by Cookie Consent

Popular x64-bit Drivers Tags

You are here: Home \ Drivers \ Digital Camera / Webcam / Camcorder \ Nikon \ Nikon Z 9 Camera Firmware 4.00

Nikon Z 9 Camera Firmware 4.00

OS: Windows 8.1, Windows 8.1 64 bit, Windows 10, Windows 10 64 bit, Windows 11
downloads: 9
size: 71.90 MB
updated: June 14, 2023
tags: Nikon Z 9 Camera Firmware 4.00, download Nikon Z 9 Camera Firmware 4.00, Nikon Z 9 Camera Firmware 4.00 free download, Nikon Z 9 Firmware, Z 9 Camera Firmware, Nikon Z 9 4K UHD Camera Firmware, Z 9, Firmware, Nikon, Camera




&Note:&& - Users of the following software will need to update to the latest versions.&
- Camera Control Pro 2 version 2.36.0 or later, IPTC Preset Manager version 1.3.0 or later, NX Studio version 1.4.0 or later, NX MobileAir version 1.2 or later (Android edition), NX Field version 1.4 or later&
- The changes listed below under “Still Photography”, “Video Recording”, “Playback”, “Controls”, “Displays”, and “Network (Also NX Field)” are detailed in the Supplementary Firmware Update Manual.&
&&Still Photography:&& - Added [Auto capture] to the photo shooting menu. Users can select capture criteria from [Motion] (the direction the subject is moving), [Distance] (how far the subject is from the camera), and [Subject detection] (whether or not a subject of a given type is detected), and the camera will take photographs automatically while it detects subjects that meet the selected criteria. Note that [Distance] is available with NIKKOR Z lenses and may not function as expected when used with other lenses.&
- The length of time the camera will continue to buffer frames before cancelling shooting during the Pre-Release Capture phase of high-speed frame capture has been increased from 30 to 300 seconds.&
- Added [Large] to the size options available for [Role played by card in Slot 2] &> [JPEG Slot 1 - JPEG Slot 2] in the photo shooting menu.&
- Added new bracketing increments for use during auto bracketing with [AE & flash bracketing], [AE bracketing], or [Flash bracketing] selected for [Auto bracketing set]. This change also applies to [Interval timer shooting] &> [Options] &> [AE bracketing] &> [Increment].&
&&Video Recording:&& - Added [Auto capture] to the video recording menu. Users can select capture criteria from [Motion] (the direction the subject is moving), [Distance] (how far the subject is from the camera), and [Subject detection] (whether or not a subject of a given type is detected), and the camera will record video automatically while it detects subjects that meet the selected criteria. Note that [Distance] is available with NIKKOR Z lenses and may not function as expected when used with other lenses.&
- Added low ISO sensitivity options to [ISO sensitivity settings] &> [ISO sensitivity (mode M)] for use during N-Log video recording.&
- Changed the range of speeds available for Hi-Res Zoom.&
- Added slow-motion video recording.&
&&Playback:&& - Made changes to the [Select for upload to computer] and [Select for upload (FTP)] items in the playback “i” menu and added [Select for priority upload to computer] and [Select for priority upload (FTP)].&
&&Controls:&& - Added support for the power zoom feature on power zoom lenses.&
- Added an [Exposure delay mode] item to the [CUSTOM SETTINGS MENU] in position d6.&
- Added to the custom controls and roles assignable via the following items in the [CUSTOM SETTINGS MENU]. New reset options have also been added.&
&f2[Custom controls (shooting)]&&
&f3[Custom controls (playback)]&&
&g2[Custom controls]&&
&Among the roles that can now be assigned via Custom Settings f2 [Custom controls (shooting)] and g2 [Custom controls] is [Switch eyes], which can be used to switch focus between the subject’s left and right eyes.&&
&A new [Frame advance zoom position] &> [Prefer focus point] role for Custom Setting f3 [Custom controls (playback)] can be used during playback zoom to center the display on the active focus point for each picture when scrolling through pictures using a command dial.&&
- Made updates to [Non-CPU lens data] in the [SETUP MENU].&
- Increased the character limit for “Category” entries in IPTC presets.&
- Restructured the [Camera sounds] item in the [SETUP MENU] with the addition of new options, including new sounds and volume level adjustment for the electronic shutter.&
&&Displays:&& - Added focus-distance information to the focus distance indicator displayed during manual focus.&
- The option selected for [Viewfinder display size] (formerly [Finder display size (photo Lv)]) in the [SETUP MENU] now also applies in video and playback modes.&
&&Network (Also NX Field):&& - Made changes and additions to the [Connect to FTP server] item in the [NETWORK MENU].&
- Changed the procedure used when configuring the camera for synchronized release, increasing to twenty the number of groups that can be created, while the number of cameras in each group that can be controlled from the master camera has been increased to sixteen.&
- Added [Overwrite copyright info] under [Connect to other cameras] in the [NETWORK MENU].&
&&App-Related Changes:&& - With NX MobileAir: the camera live view display for photo mode now shows NX MobileAir status, and&
- With NX MobileAir: camera settings saved to a memory card using [Save/load menu settings] can now be downloaded to the smart device or copied from the smart device to the camera memory card using NX MobileAir.&
&&Other Changes:&& - Improved the accuracy of [3D-tracking] for small, fast-moving subjects when [Auto], [People], [Animal], or [Vehicle] is chosen for [AF subject detection options] and no subject of the selected type is detected.&
- Improved focus accuracy for dark, low-contrast subjects.&
- Improved focus lock-on with flicker detection in low-speed continuous release mode.&
- Made other improvements to the autofocus operation and its reliability.&
- Improved the performance of auto white balance during portrait photography.&
- Fixed an issue that sometimes resulted in the viewfinder darkening during playback when [Auto] was selected for [Viewfinder brightness].&
- It is now easier to obtain the correct exposure from the first shot during interval-timer photography in high-contrast settings or settings dark enough for starlight view.&
- The histogram display is no longer available when starlight view is enabled.&
- Changed the video low-capacity warning so that it is now displayed in white on a red background when there is less than one minute remaining. The warning is now also displayed when recording is not in progress.&
- Users now have more precise control when scrolling through videos during playback using the progress bar.&
&&Fixed the following issues:&& - The camera would sometimes stop responding if the standby timer was reactivated after having expired with [Prioritize viewfinder (1)] or [Prioritize viewfinder (2)] selected for [Limit monitor mode selection] and high-speed frame capture selected for [Release mode].&
- The camera would sometimes stop responding if changes were made to Picture Control parameters during NEF (RAW) processing.&
- The viewfinder would in rare instances fail to display the focus point correctly during burst photography.&
- [Image size] could not be adjusted by holding the QUAL button and rotating the sub-command dial if a DX-format lens was attached with [ON] selected for [Image size settings] &> [Enable DX image sizes].&
- SB-800 flash units would sometimes stop responding after pictures were taken with the flash disabled.&
- [Vignette control] would sometimes fail to correctly control vignetting when an option other than [Off] was selected.&
- Users could no longer select the FX image area after choosing the DX image area in Camera Control Pro 2 with a 100p or 120p option selected for video frame rate.&
- Focus could still be adjusted using the focus ring when [Disable] was selected for [Manual focus ring in AF mode] in the [CUSTOM SETTINGS MENU] if an option other than [Non-linear] was chosen for [Focus ring rotation range] in the [CUSTOM SETTINGS MENU].&
- The battery would draw down more quickly while the camera was off if [ON] was selected for [Connect to smart device] &> [Wi-Fi connection] in the [NETWORK MENU] even if [OFF] was selected for both [Bluetooth connection] and [Upload while off].&
- The German and Korean menus and help text contained typos.&
&&Viewing the Camera Firmware Version:&& - Turn the camera on.&
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.&
- Check the camera firmware version.&
- Turn the camera off. &
&&Updating the Camera Firmware:&& - Create a folder on the computer hard disk and name it as desired.&
- Download the file to the folder newly-created.&
 - Extract the file to a folder named “Z9Update”&
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.&
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.&
- Insert the memory card into the camera and turn the camera on.&
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.&
- Once the update is complete, turn the camera off and remove the memory card.&
- Confirm that the firmware has been updated to the new version.&&About Digital Camera Updates:&&Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.&
&
On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.&
&
It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.&
&
This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.&
&
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.&
&
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.&
&
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.&&



Most popular Nikon 64-bit drivers

Nikon Camera NX Tether Utility 2.0.0
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, ...
tags: Nikon Camera NX Tether Utility 2.0.0, download Nikon Camera NX Tether Utility 2.0.0, Nikon Camera NX Tether Utility 2.0.0 free download, Nikon Z9 NX Tether Utility, Nikon Z7 NX Tether Utility, Nikon X6 NX Tether Utility, Camera, NX Tether, Nikon

Nikon Camera NX Studio Utility 1.6.1
NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools ...
tags: Nikon Camera NX Studio Utility 1.6.1, download Nikon Camera NX Studio Utility 1.6.1, Nikon Camera NX Studio Utility 1.6.1 free download, Nikon Z f NX Studio Utility, Nikon Z7 NX Stdio Utility, Nikon COOLPIX NX Studio Utility, Camera, NX Studio, Nikon, Z f

Nikon Z 8 Camera Firmware 2.00
&Still Photography&& - Added [Pixel shift shooting] to the photo shooting menu.& - Added new picture controls.& - Added [Birds] to [AF subject detection options] in the photo shooting menu.& - ...
tags: Nikon Z 8 Camera Firmware 2.00, download Nikon Z 8 Camera Firmware 2.00, Nikon Z 8 Camera Firmware 2.00 free download, Nikon Z 8 Firmware, Z 8 Camera Firmware, Nikon Z 8 8K Camera Firmware, Z 8, Firmware, Nikon, Camera

Nikon Z fc Camera Firmware 1.60
&Changes:&&- More background color options are now available for the [Information display] item in the [SETUP MENU].&- Added a [Welcome screen] item in [SETUP MENU]. A welcome screen will be displayed ...
tags: Nikon Z fc Camera Firmware 1.60, download Nikon Z fc Camera Firmware 1.60, Nikon Z fc Camera Firmware 1.60 free download, Nikon Z fc Firmware, Z fc Camera Firmware, Nikon Z fc 4K UHD Camera Firmware, Z fc, Firmware, Nikon, Camera

Nikon Z 9 Camera NX Tether Utility 2.0.0
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, ...
tags: Nikon Z 9 Camera NX Tether Utility 2.0.0, download Nikon Z 9 Camera NX Tether Utility 2.0.0, Nikon Z 9 Camera NX Tether Utility 2.0.0 free download, Nikon Z 9 NX Tether Utility, Nikon NX Tether Utility, Nikon Camera NX Tether Utility, Z 9, NX Tether, Nikon, Camera

Members area

Login:
Password:
Remember me

Sign Up  |  Forgot Password?

Top 64-bit Drivers

64-bit Tags